Service Configuration (Service Password Protected) - ACR Electronics NAUTICAST SAR AIS User Manual

3.5.6 Service Configuration (Service Password Protected)

The Service Configuration Menu allows initial configuration of the Service Password, Password
Settings (on/off), MMSI/IMO Numbers and the option of resetting the NAUTICAST to Factory
Settings.
The Service Password is required in order to enter the Service Configuration Menu. This is a higher
security level than can be reached with the User Password and therefore ensures that the Service
Configuration is protected, and limited to authorized service personnel.
Note:
The default Service Password is set at "NAUT"
It is strongly recommended to change it immediately after commencing initial NAUTICAST operation!
N 1
-----| |
View | +- 2. User Password Settings
-----| +- 4. Restore Factory Settings
Msg. |
-----|
Displ|
----------------------------------------
NUM| Select->|
Dynamic Keys: Service Configuration
[M5]
[M8]
User Manual
o o
23' E 0 17' |1>0.10|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
| +- 1. Change Service Password
| +- 3. Change MMSI / IMO
|
|
|
|
Confirm Submenu
[Select]
Selection
Return to Main
[Back]
Menu
|<-Back
Confirm Submenu
[Enter]
Selection
65
Y1-03-0207 Rev. A