General Interface Description - ACR Electronics NAUTICAST SAR AIS Installation Manual

Components and Interfaces
The diagram below illustrates which devices can be connected to the NAUTICAST. For a
detailed description of sensor connecting e.g. an existing Gyro to the NAUTICAST refer to
Chapter 3 "Sensor Installation" on page 12.

3.3 General Interface Description

Interface
Sensor 1
Sensor 2
Sensor 3
ECDIS
PILOT
LONG RANGE
DGPS (RTCM SC104)
ALARM CIRCUIT
Installation Manual
Designation Speed
CH 1 4800bps or 38400bps
CH 2 4800bps or 38400bps
CH 3 4800bps or 38400bps
CH 4 38400bps
CH 5 38400bps
CH 8 38400bps
CH 9 9600bps
CH 10 Dry relay contact (power off and alarm state closed)
Direction
Input
Input
Input
Input/Output
Input/Output
Input/Output
Input/Output
8
Y1-03-0208 Rev.A