VMware VCENTER CHARGEBACK 1.5 Manual page 53

What to do next
After you modify a property value, you must restart the data collector for the change to take effect.
You can test the connection to the Cloud Director database by clicking the Test VMware Cloud Director
database connection link.
Configure vShield Manager Data Collector
If you have installed the vShield Manager Data Collector, you must specify the user name and password to
access the vShield Manager instances. You can set this access information from the Cloud Data Collectors page
of the Settings tab.
The vShield Manager Data Collector cannot function if the user name and password for the vShield Manager
instances are not set. After installing the vShield Manager Data Collector, the vShield Manager instances do
not appear immediately in vCenter Chargeback. You can see these instances in the application only after the
VMware Cloud Director Data Collector processes the vShield Manager-related events.
Only users with the Super User role assigned to them can perform this task.
Procedure
1 In the Settings tab, click Cloud Data Collectors.
2 Select the vShield Manager tab.
3 Select the property from the vShield Manager common properties section and click Edit.
You can modify the job interval for the broadband statistics collector job run by the vShield Manager Data
Collector. vShield Manager Data Collector runs a job that collects broadband statistics from vShield
Manager for all the registered networks. The broadband statistics collector job interval defines the time in
seconds between two such job runs.
The Change Data Collector Property screen is displayed.
4 Modify the property value and click Save.
5 Select the required instance from the vShield Manager instances section and click Edit.
You can modify the following settings for the selected vShield Manager instance.
Property
Host
User name
Password
Confirm password
The Edit vShield Manager Setting screen is displayed.
6 Modify the property value and click Save.
What to do next
If you modify the Broadband statistics collector job interval property value, you must restart the data collector
for the change to take effect. You need not restart the data collector if you have made modifications only to the
vShield Manager instances.
VMware, Inc.
Description
Host name or IP address of the vShield Manager instance.
User name used to connect to the vShield Manager instance.
Password for the user.
Password for the user.
Chapter 3 Configuring Administration Settings
53