VMware VCENTER CHARGEBACK 1.5 Manual page 140

vCenter Chargeback User's Guide
Solution
1 Check whether the vCenter Server is started and running.
2 Check whether the vCenter Server is reachable over the network.
3 Check whether the proxy settings on the Web browser are correct.
If you have configured the proxy server settings on the Web browser and included the IP address of the
vCenter Chargeback machine in the bypass proxy list (No Proxy for or Exceptions), ensure that the
complete IP address or the FQDN of the vCenter Chargeback machine is entered in the list and not a partial
address. For example, if the IP address of the machine is
must provide the full IP address and not
Unable to Change the Password for the vCenter Chargeback Keystore
The default password for the vCenter Chargeback keystore is
Problem
How do I change the password for the vCenter Chargeback keystore that store the SSL certificates for secure
LDAP?
Solution
1 On the machine on which the load balancer is running, run the
Installation_Path \jre\bin\
keytool -storepasswd - keystore "
Here,
Installation_Path \jre\lib\security\cacerts
2 Specify the current password for the keystore.
3 Specify the new password for the keystore and confirm the same.
Unable to Configure Another VMware Cloud Director Setup with vCenter
Chargeback
A vCenter Chargeback instance can communicate with a VMware Cloud Director setup through the VMware
Cloud Director Data Collector.
Problem
A VMware Cloud Director Data Collector is registered with vCenter Chargeback for a VMware Cloud Director
setup. However, you are unable to configure another VMware Cloud Director Data Collector with the same
vCenter Chargeback instance but different VMware Cloud Director setup.
Cause
A vCenter Chargeback instance can communicate with only a single VMware Cloud Director setup. You can
have multiple VMware Cloud Director Data Collector instances registered with this vCenter Chargeback
instance. However, each data collector instance must communicate with the same VMware Cloud Director
setup. You can modify the VMware Cloud Director setup details in vCenter Chargeback and the corresponding
VMware Cloud Director Data Collector.
140
, or the FQDN
90.0.*.*
folder.
Installation_Path \jre\lib\security\cacerts"
is the default keystore path.
and the host name is
90.0.1.1
chargeserver.example.com
.
changeit
command from the
keytool
, you
chargeserver
.
VMware, Inc.