Working With Networks In A Vapp - VMware CLOUD DIRECTOR 1.0 Manual

Open a Virtual Machine Console in a vApp
You can open and power on a virtual machine in a vApp.
Procedure
1 Click My Cloud.
2 On the vApps page, select a vApp, right-click, and select Open.
3 On the Virtual Machines tab, select a virtual machine, right-click, and select Open Console.
The virtual machine console appears.
What to do next
You can complete operations, such as power on, power off, and so on.
Display a vApp Diagram
A vApp diagram provides a graphical view of the vApp.
Procedure
1 Click My Cloud.
2 On the vApps page, select a vApp, right-click, and select Open.
3 Click the vApp Diagram tab.
The vApp diagram is displayed.
What to do next
You can complete the same options in the diagram that you can on the vApps page.
Access Your Networks
You can access and display the details of the networks in a vApp.
Procedure
1 Click My Cloud.
2 In the left pane, click vApps.
3 Select a vApp, right-click, and select Open.
You can review the virtual machines, networks, a diagram of this vApp, and the virtual machine consoles
in this vApp.
4 Click on the Networking tab.
5 Select the Show networking details to display details about each network.

Working with Networks in a vApp

In a vApp, you can create a vApp network or use an organization network through a direct or fenced
connection.
As the organization administrator, when you select the Networking tab in a vApp, and the Show networking
details check box is selected, a list of the networks that are connected to the vApp are displayed.
You can connect a virtual machine to an organization network or a vApp network.
VMware, Inc.
Chapter 8 Working with vApps
53