Understanding Vapps - VMware CLOUD DIRECTOR 1.0 Manual

Cloud Director User's Guide
5 Select the operating system.
6 Select the number of CPUs.
7 Select the amount of memory.
You can also type the amount of memory and press Enter.
8 Select or type the hard disk size and select GB or MB.
9 Select the bus type.
10 Select the number of NICs.
11 Click OK and in Add Virtual Machines, click Next.
12 (Optional) You can click Finish at any time.
Default values are assigned for any missing or skipped data.
Configure the Virtual Machine
You must configure the virtual machine to power it on.
Procedure
1 Select a vDC.
2 (Optional) Modify the virtual machine name and computer name.
3 Select your network.
4 Select your IP assignment.
If you select Static - Manual, type the IP address.
5 Click Next.
6 (Optional) Click Finish at any time.
Configure Networks
You can determine how the vApp, its virtual machines, and its networks connect to the organization's
networks.
Procedure
1 Select Show networking details.
2 Review the network information.
3 Click Next.
4 Review the summary for the vApp.
5 Click Finish.

Understanding vApps

A vApp consists of a vApp diagram, virtual machines, and vApp networks.
The vApp diagram shows the state of the virtual machines. You can also power the machines on and off from
the diagram.
52 VMware, Inc.