VMware CLOUD DIRECTOR 1.0 Manual page 54

Cloud Director User's Guide
After you connect a virtual machine to an organization network, determine whether you want a fence or direct
connection.
Direct, means that this network is directly connected to the organization network.
n
Fenced, means that you can have identical virtual machines that are powered on in a vApp without conflict
n
When you connect a virtual machine to a vApp network, you must create a vApp network. In the Connection
drop-down menu, you can select None, which means that the network is isolated in the selected vApp, or to
an organization network that is referred to as a NAT.
Add a Network to a vApp
You can add a network to your vApp.
You are an organization administrator.
Procedure
1 Click My Cloud.
2 In the left pane, click vApps, right-click, and select Open.
3 On the Networking tab, select the Show networking details check box.
4 Click the Add Network button on the bottom right side of the page.
5 Select a network option.
6 If you select vApp Network, complete these steps.
a Click Next.
b Type your network specifications and click Next.
c Type a network name and click Next.
d Review your vApp network settings and click Finish.
7 If you select Organization network, complete these steps.
a Click Next.
b Select a network and click Finish.
Configure Network Services
You can configure vApp network services such as DHCP, firewall, and NAT.
Prerequisites
You have added at least one network.
Procedure
1 Click My Cloud.
2 In the left pane, select vApps.
3 Select a vApp, right-click, and select Open.
4 On the Networking tab, select a network, right-click, and select Configure Services.
5 In the DHCP tab, select the Enable DHCP check box to change the DHCP settings.
6 Click OK.
7 On the Firewall tab, select the Enable firewall check box to change your firewall settings.
54 VMware, Inc.