Configure External Ip Mapping For An Organization Network; Reset An Organization Network - VMware CLOUD DIRECTOR 1.0 Manual

Cloud Director User's Guide
Procedure
1 Click Administration.
2 In the left pane, select Cloud Resources > Networks.
3 Select an organization network, right-click, and select IP Allocations.

Configure External IP Mapping for an Organization Network

You can configure certain organization networks to provide external IP mapping. This mapping provides
external access to services that run on virtual machines on the organization network.
When you configure external IP mapping, Cloud Director maps an external IP address and a port to a service
running on a port on a virtual machine for inbound traffic.
You are an organization administrator.
Prerequisites
An external NAT-routed organization network and an external IP address.
Procedure
1 Click Administration.
2 Select Cloud Resources > Networks.
3 Right-click the organization network name and select Configure Services.
4 Click the NAT- External IP Mapping tab and click Add.
5 Configure the port forwarding rule.
a Select an external IP address.
b Select an external port.
c Type the IP address of the destination virtual machine.
If the virtual machine is fenced, type its external IP address.
n
If the virtual machine is not fenced, type its internal IP address.
n
d Select an internal port.
e Select a protocol for the type of traffic to forward.
f Click OK.
6 Click OK.

Reset an Organization Network

If the network services, such as DHCP settings, firewall settings, and so on, that are associated with an
organization network are not working as expected, reset the network.
You are an organization administrator.
No network services are available while an organization network resets.
Prerequisites
An external NAT-routed organization network or an internal organization network.
22 VMware, Inc.