Advertisement
Placing V270 on Floor
Fully open the legs and place on a flat and horizontal floor.
!
To open the U-Leg, grab the main frame and the rubber cap on the U-Leg.
Do NOT pull the Alloy Leg Guide directly, otherwise it may be bent or damaged.
Check that all 4 points are touching the floor
evenly.
If all 4 points are not touching the floor evenly,
the frame could be deformed and cause damage
to the trainer and possibly your bike.
About Leg Height Adjuster
Each U-Leg height can be adjusted separately by
+/- 10 mm travel.
This adjuster allows for uneven floor or ground
compensation to help insure proper stability.
When using the adjuster, be sure to check and make
sure that all 4 points are touching the ground evenly.
And the trainer should be positioned as close as
possible to the floor for better stability.
Main Frame
- 4 -
Alloy Leg Guide
U-Leg
Adjuster Knob
Advertisement
