Installing The Ventilation System; Installation Ls300; Inastallation Roof Exhaust R500 - Dometic ABSORPTION RMD 8501 Installation Instructions Manual

4.3 Installing the ventilation
system
4.3.1 Installing LS300
To install the ventilation grilles, cut two rectan-
gles width b = b490mm, height a 249mm, in
the outer wall of the vehicle (for position of the
cuts, see Fig. 11,12).).
1
Cut two rectangles in the
outer wall of the vehicle.
2
Seal the mounting frame
making it waterproof
( does not apply for
mounting frames with
integral seal) and screw
into position.
3
Insert ventilation grille.
4
Insert slider.
5
Lock ventilation grille.
b
a
Fig. 13
14 x
Fig. 14
Fig. 15
Fig. 16
Fig. 17
13
Correct mounting of the lower ventilation grille
facilitates access to the connections and
functional parts during maintenance.
4.3.2 Installing roof exhaust R500
Measurements of roof exhaust R500
Length Width
595 mm 205 mm
Roof cut out: 87mm X 507 mm
1
Seal the installation bays
and screw them to the
vehicle roof.
2
Place the hood in posti-
on and screw it to the
installation bays.
Installation
Height
150 mm
Fig. 18
Fig. 19
Fig. 20