System And Memory Requirements - Epson ActionLaser 1000 User Manual

System and memory requirements

Any Macintosh computer to which the printer is connected
must be running System 7.x and have at least 2 MB of RAM.
Caution:
Do not install EpsonScript on a computer running System 6.x
or earlier. Installing EpsonScript on early systems can corrupt
them.
The memory requirements for your printer depend on which
option and printer you are using. Make sure your printer has
the minimum amount of memory required for your option as
shown in the following table.
Option
EpsonScrIpt Level 2 cartridge (C83202*)
EpsonScript Level 2 board (C83209*)
You may need to add more memory if you regularly print
documents with detailed graphics, complex layouts, or paper
larger than A4 or letter size. Also, if you use the Page Protect
mode, you may need more memory than shown in the table.
By reducing resolution to 300 dpi, you can save memory.
If you have an EPL-5000/5200 or an ActionLaser 1000/1500
and you want to connect it to more than one computer, you
must assign at least the minimum amount of required memory
to the channel using the EpsonScript option. See your printer
manual for more information.
4 Introduction
Minimum winter memory
1.5 MB
2MB