Manufacturing Options - Intel D845HV Technical Product Specification

Table 2. Feature Summary (continued)
Instantly Available
PC Technology
For information about
The board's compliance level with ACPI, Plug and Play, and SMBIOS.

1.2.2 Manufacturing Options

Table 3 describes the D845HV and D845WN boards' manufacturing options. Not every
manufacturing option is available in all marketing channels. Please contact your Intel
representative to determine which manufacturing options are available to you.
Table 3.

Manufacturing Options

Audio
CNR
LAN
Hardware Monitor
Subsystem
The items listed below are component changes for an alternate configuration of the D845HV board
Delete the auxiliary front panel power/sleep/message-waiting LED connector (shown on page 68)
Delete the front chassis fan connector (shown on page 58)
Delete the Mic-in pre-amp for boards equipped with the audio subsystem (described on page 32)
Delete the SCSI hard drive activity LED connector (shown on pages 61 and 62)
Delete the serial port B connector (shown on page 68)
Delete the standby power indicator LED (shown on page 44)
Delete the third DIMM socket (shown on pages 14 and 15)
Delete the two USB connectors adjacent to the PS/2 connectors on the back panel (shown on page 52)
Delete the 47 inductive speaker (described on page 126)
Replace I/O controller with SMSC LPC47M132 LPC bus I/O controller (functionally equivalent to SMSC
LPC47M142 LPC bus I/O controller but without an integrated USB hub) (described on page 31)
For information about
Available configurations of the D845HV and D845WN boards
NOTE
The LAN and the CNR manufacturing options are mutually exclusive.
Support for PCI Local Bus Specification Revision 2.2
Suspend to RAM support
Wake on PCI, CNR, RS-232, front panel, PS/2 devices, and USB ports
Audio subsystem for AC 97 processing using the Analog Devices AD1885 codec
One Communication and Networking Riser (CNR) connector (slot shared with
PCI bus connector 3 on the D845HV board and with PCI bus connector 6 on the
D845WN board)
®
Intel 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device
Voltage sense to detect out of range power supply voltages
Thermal sense to detect out of range thermal values
Two fan sense inputs used to monitor fan activity
Product Description
Refer to
Section 1.4, page 17
Refer to
Section 1.3, page 17
13