Overview; Feature Summary - Intel D845HV Technical Product Specification

Intel Desktop Board D845HV/D845WN Technical Product Specification

1.2 Overview

1.2.1 Feature Summary

Table 2 summarizes the D845HV and D845WN boards' major features.
Table 2.

Feature Summary

Form Factor
Processor
Memory
(Refer also to
Table 3, page 13)
Chipset
Video
I/O Control
(Refer also to
Table 3, page 13)
Peripheral
Interfaces
(Refer also to
Table 3, page 13)
Expansion
Capabilities
BIOS
12
D845HV: microATX (9.60 inches by 9.60 inches)
D845WN: ATX (12.00 inches by 9.60 inches)
®
Support for an Intel Pentium
400 MHz system bus
Three 168-pin SDRAM Dual Inline Memory Module (DIMM) sockets
Support for single-sided or double-sided DIMMs (PC133 only)
Support for up to 3 GB system memory
The D845HV/D845WN boards have been designed to support DIMMs
NOTE:
based on 512 Mbit technology for a maximum onboard capacity of up to 3
GB, but this technology has not been validated on this board. Please refer
to the following Intel web sites. For the D845HV board:
http://developer.intel.com/design/motherbd/hv/hv_mem.htm
For the D845WN board:
http://developer.intel.com/design/motherbd/wn/wn_mem.htm
®
Intel 845 Chipset, consisting of:
®
Intel 82845 Memory Controller Hub (MCH)
®
Intel 82801BA I/O Controller Hub (ICH2)
®
Intel 82802AB 4 Mbit Firmware Hub (FWH)
AGP connector supporting 1.5 V 4X AGP cards
SMSC LPC47M142 LPC Bus I/O controller
Up to seven Universal Serial Bus (USB) ports
Two serial ports
One parallel port
†
IrDA -compliant infrared port
Two IDE interfaces with UDMA 33, ATA-66/100 support
One diskette drive interface
†
PS/2 keyboard and mouse ports
Three fan connectors
D845HV: Three PCI bus add-in card connectors (SMBus routed to PCI bus
connector 1)
D845WN: Six PCI bus add-in card connectors (SMBus routed to PCI bus
connector 1)
Intel/AMI BIOS (resident in the Intel 82802AB 4 Mbit FWH)
Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,
and SMBIOS
®
4 processor in an mPGA478 socket
continued