Swingarm And Rear Axle Holder Diagram - Eton VECTOR ST 250 Service Manual

15.4 SWINGARM & REAR AXLE HOLDER
This section is to introduce how to repair the swingarm,
The following pictures are going to teach you how to
Install the swingarm.
1. Put the swingarm at proper position as shown in
picture. Two hanger bolts will be used to hold the swingarm
at right and left side.
2. Tighten a hanger bolt on the right side as shown in
picture.
Hanger bolt
Hanger bolt
133
Swingarm