Electric Starter Troubleshooting; Light Bulbs Replacement; Battery Charging; Headlight Bulbs Replacement - Eton VECTOR ST 250 Service Manual

Hide thumbs Also See for VECTOR ST 250:
Table of Contents

Advertisement

CHARGING
Firstly, connect the charged positive cable to the battery
positive terminal. Secondly, connect the charged negative cable to the battery
negative terminal.
Using 0.9A-charging current about 11 hours. (Normal charging)
Or using 4A-charging current about 3 hour. (Quick charging)
Keep flames and sparks away from a battery being charged.
Quick charging should be limited to an emergency;
Normal charging is preferred.
17.5 ELECTRIC STARTER
Information
If a battery has not work a period of time, the voltage may
reduce and may not provide enough power to starter motor.
If a battery is in a good condition, but engine can not be start.
Please go back to service.
TROUBLESHOOTING
Starter Motor Turns Slowly
Weak battery.
Poorly connected starter motor cable.
Failed starter motor.
Poorly connected battery ground cable.
Starter Motor Cannot Work
Engine stop switch at "off "position.
Gearshift bar is not at neutral position.
Check for a blown fuse near battery.
Make sure that the battery is fully charged and in good condition.

17.6 LIGHT BULBS REPLACEMENT

HEADLIGHT
To remove the headlight, please loosen three screws at
back of the headlight.
144
Head light

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

250

Table of Contents