Right Handlebar; Reverse Gear Lever - HYOSUNG TE 100 R Manual

Hide thumbs Also See for TE 100 R:
Table of Contents

Advertisement

CAUTION
When the starter motor doesn t rotate
within 5 seconds after pushing the
switch, try again after 10 seconds to
prevent damage to the battery.
Engine Stop Switch
Position : The ignition circuit is
Position : The ignition circuit is on

RIGHT HANDLEBAR

Front Brake Lever
Apply the front brake by squeezing the front
brake lever towards the grip.
Throttle Lever
Engine speed is controlled by the position
of the throttle lever. Push it forward to
increase engine speed. Release it to
decrease engine speed.
This lever is operated by the rider s thumb.
off.
The engine cannot start
or run.
and the engine can
run.
Throttle Limiter
TE100R
is equipped with the throttle
limiter to restrict maximum engine power by
limiting throttle lever travel. The supervising
adult should adjust this limiter to limit
maximum vehicle speed according to the
rider s skill and experience.
To adjust the throttle limiter :
1. Loosen the lock nut
2. Turn the throttle limiter screw
clockwise to restrict maximum engine
power or counterclockwise to increase
maximum engine power.
3. Tighten the lock nut

REVERSE GEAR LEVER

14
.
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Te 100r - v1Te 100r

Table of Contents