Toshiba Libretto 100CT User Manual page 81

File No. 960-140
Selecting YES for
displays the operation guide on the right side of the display screen as shown below:
ERROR STATUS NAME
These three selections have the following functions respectively:
1. Terminates the test program and exits to the subtest menu.
2. Continues the test.
3. Restarts the test from the error.
Selecting NO for
Table 3-1 in Section 3.3 lists the function of each test on the subtest menu. Table 3-2 in
Section 3.16 lists the error codes and error status for each error.
3-6
stops the test program when an error is found and
ERROR STOP
[ [ HALT OPERATION ]]
keeps the test running even if an error is found.
ERROR STOP
1: Test end
2: Continue
3: Retry