■ Assembly of LCD Hinge
Initial Condition
of LCD Hinge
Rotation Direction
Cable Hold Plate
Screw
LCD Hinge
Safety Working
S1:Insulation S2:Pinching Cables S3:Sharp Edge
CAUTION
S4:Part No. Check S5:Others
S3
Ensure the "C" side comes
to the lower right corner
when viewing from above.
Cable Hold Plate
S2
Avoid catching the Cable.
Screw
Avoid catching the Cable (when repairing or when not using the jig).
Temporarily fix the both sides ("A") of the Hinge using the Screw, and fix the Cable Hold Plate.
After fixing the Cable Hold Plate, remove the screws from the both sides ("A").
38
/
90
Using the fixing jig when fixing the Hinge
Fix
Fix
Tighten
If you arrange the Cable in the area,
you do not need to use the fixing jig.