Panasonic 30 - Toughbook - Core 2 Duo Service Manual page 24

1
2
4. Lift the far side of the Keyboard and slide it to backward,
and then turn the Keyboard over frontward.
<N1>
KBD
Connector
Cover
5. Remove the 3 Screws <N1>.
6. Remove the KBD Connector Cover.
Keyboard
FPC
TP Tape
Touch Pad
Click Button
Plate
Connector
(CN800)
7. Disconnect the Cable from Connector (CN18).
8. Remove the Keyboard.
9. Remove the TP Tape.
Screws <N1> : DFHE5025XA
Screws <N9> : DRSB2+5FKL
9.1.4.
Keyboard
Screws <K14-8> : DRHM5025YAT
9.1.5.
Keyboard
Screws <N10> : DRHM0061ZA
Connector
(CN18)
24 / 90
10. Disconnect the Cable from Connector (CN800).
11. Remove the Touch Pad and Click Button Plate.
Removing the DIMM Lid Assíy
<K14-8>
<K14-8>
<K14-8>
1. Remove the 4 Screws <K14-8>.
2. Remove the DIMM Lid Ass'y.
Removing the Rear Cabinet
<N10>
<N10>
<N10>
<N10>
<N10>
<N10>
<N10>
1. Remove the 13 Screws <N10>.
2. Open the LID Rubbers.
3. Remove the Rear Cabinet.
<K14-8>
DIMM Lid Ass'y
<N10>
<N10>
<N10>
<N10>
<N10>
<N10>