Removing The Cd Drive - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

Models: 1246, 1247, 1277, 1278, and 1279
| Home Page
Illustrated Parts Catalog
Removal and Replacement Procedures
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest Cover
with Touch Pad
Heatspreader
Keyboard
Processor
Hard Drive
CD Drive
Battery Charger
Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
System Board
Dip Switch
Settings
Memory Module
Maintenance & Service Guide
Presario Series
| Notice | Preface |
| Removal & Replacement Procedures
Pin Assignments |
Product Description
Battery Pack Operations
| Troubleshooting
| Specifications
Removing the
CD Drive
NOTE:
To remove the CD
drive, complete the
following steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest cover with
touch pad.
3. Remove the
heatspreader.
4. Remove the
keyboard.
5. Remove two
screws located at the
back of the CD drive.
Next Step
Illustrations
may show
parts
removed
that are not
part of this
procedure.
For
example,
the
illustration
at left
shows the
CPU cover
removed to
better
enable you
to see the
screw
locations. It
is
necessary
to remove
only the
parts listed
in the
written
procedure.