Dell PowerConnect M6348 Getting Started Manual page 32

Unit 1 - Waiting to select management unit
)>
Applying configuration, please wait ...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running as quickly as
possible.You can skip the setup wizard, and enter CLI mode to
manually configure the switch. You must respond to the next
question to run the setup wizard within 60 seconds, otherwise the
system will continue with normal operation using the default
system configuration.Note:You can exit the setup wizard at any
point by entering [ctrl+z].
60
Would you like to run the setup wizard (you must answer this
question within 60 seconds)?[Y/N]
]
步骤 1 ：
The system is not setup for SNMP management by default. To manage
the switch using SNMP (required for Dell Network Manager) you can
Network Manager
. Set up the initial SNMP version 2 account now.
2
. Return later and setup other SNMP accounts. (For more
information on setting up an SNMP version 1 or 3 account, see
the user documentation).
SNMP
Would you like to setup the SNMP management interface now? [Y/N]
30
POST
[ctrl+z]
[Y/N] y
]
1 3
SNMP
Dell
CLI
SNMP
[Y/N] n
1 -
Dell
[
SNMP [Dell
SNMP [
]
...
60
SNMP