Assembling the speakers
Before connecting the speakers, attach the speaker stand to the speaker.
(For the front speakers)
Use the parts as follows:
• Front speakers (2)
• Speaker cords (2, red/white)
• Stand bases (2)
• Screws (2)
For details of how to connect the speaker cords to the SPEAKER jacks, see page 17.
Note
• Spread a cloth on the floor to avoid damaging the floor when you assemble the speakers.
Tip
• You can use the speaker without the speaker stand by installing it on the wall (page 15).
1
Thread the speaker cord through the hole in the stand base.
The connector and color tube of the speaker cords are the same color as the label of the jacks to be
connected.
Use the speaker cords as follows:
• Front left speaker (L): White
• Front right speaker (R): Red
Speaker cord
12
GB
Bottom of the stand base
,
Stand base