Step 1: Assembling the Speakers
Before connecting the speakers, attach the speaker stand to the speaker.
About how to connect the speaker cords to the SPEAKER jacks, see page 16.
Note
• Since the speakers are heavy, it is recommended that at least 2 people assemble the speakers.
• Spread a cloth on the floor to avoid damaging the floor.
Standard assembly
You have the option to choose from a range of stands (not supplied) if desired, according to your
installation. This manual shows the standard assembly, using the supplied speaker stands.
The front speakers are labeled "FRONT L" and "FRONT R." The surround speakers are labeled "SUR
L" and "SUR R."
1
Remove the rear panel of the surround speaker.
Rear panel
continued
9
GB