Making Connections; Connecting The Camera To A Computer; Troubleshooting - Insignia NS-DSC10B - Digital Camera - Compact User Manual

NS-DSC10A-10B_09-0323_MAN_V2.book Page 17 Monday, April 27, 2009 8:42 AM
Insignia NS-DSC10A and NS-DSC10B 10 Megapixel Digital Cameras

Making connections

You can connect your digital camera to a computer
in order to transfer files from your camera's internal
memory or memory card to your computer.

Connecting the camera to a computer

To connect the camera to a computer:
1 Connect the camera to the computer using the
supplied USB cable.
2 Turn on your camera.
The computer detects the connection and the
camera's internal memory and memory card are
shown as removable drives on the computer's file
manager screen. No image is displayed on the
camera's LCD.
Note
You can also move files to your computer by
removing the memory card from your camera and
plugging it into an external card reader (not
included).

Troubleshooting

Problem Cause
Power does not turn on. Batteries are inserted
incorrectly.
The batteries are dead.
The battery compartment
door is open.
The camera turns off Your camera turns itself off
automatically. automatically in order to
conserve battery life.
The LCD turns off. Your camera turns itself off
automatically in order to
conserve battery life.
An empty battery icon is The batteries are exhausted. Replace the batteries or
displayed on the LCD, then
the camera turns off.
Problem
The LCD displays "No
Image."
The LCD displays "Not
available for this file."
The LCD displays "Memory
full."
The LCD displays "Card
locked."
The LCD displays "Format
error."
The LCD displays "Copy
error."
The lens does not retract. DO NOT FORCE THE LENS TO
The camera does not take
pictures.
The image is not recorded
when the shutter button is
pressed.
The flash does not fire.
The image is blurry or out
Solution of focus.
Reinstall the batteries
correctly.
Replace the batteries or
recharge the batteries if they
are NiMH.
Make sure that the battery
compartment door is closed.
The image is not displayed
Press any button (except
on the LCD.
POWER) to turn your camera
back on.
Press the Power button to
Recorded images are not
turn your camera back on.
saved in memory.
Card error
recharge the batteries if they
are NiMH.
www.insigniaproducts.com
Cause Solution
No images have been stored Set your camera to Record
to the internal memory or mode to capture photos or
memory card, or image files video. Or, connect your
on the memory card cannot camera to your computer
be read by the camera. using the instructions on
page 17 to view files. Your
camera may not be able to
display images or videos
taken with other cameras or
where the file names have
been altered.
The selected function is only Choose another type of
available for selected file format.
types. The file format is not
supported.
The internal memory or the Replace the memory card or
memory card is full. delete unnecessary images.
The memory card is Turn off the camera, remove
protected. the memory card, and slide
the card's write-protect
switch to its unlock position.
The memory card is Turn off the camera, remove
protected. the memory card, and slide
the card's write-protect
switch to its unlock position.
The memory card is Turn off the camera, remove
protected. the memory card, and slide
the write-protect switch to
its unlock position.
Replace the memory card or
The memory card is full.
delete unnecessary files.
Replace the batteries or
GO BACK. You may have recharge the batteries if they
installed the wrong type of are NiMH, then hold down
battery or the battery level is the POWER button until the
too low. lens retracts.
The flash is charging. Wait for the flash to charge.
The memory is full. Insert a new memory card or
delete unwanted photos or
videos.
The memory card is not The card may be defective.
formatted correctly. Install a new card.
The flash is charging. Wait for the flash to charge.
The memory is full. Insert a new memory card.
The flash is set to OFF. Set the flash to another
mode.
The camera was moving Hold the camera steady when
when the image was shooting a photo, or mount it
captured. to a tripod.
The subject was beyond the Turn macro mode ON if the
range of the camera's focus. subject is within 5 to 15.75
inches (15 to 40 cm).
Do not use macro mode
when shooting distant
subjects.
A memory card with This camera cannot display
non-compatible photos and non-compatible images.
videos (recorded on another
camera) is loaded.
The camera was turned off or If the low battery indicator
powered down before the appears on the LCD, replace
image was stored in memory. the batteries immediately.
The memory card format may Using an external card reader
not be correct. (not included), reformat the
card using the FAT file format.
Use normal Windows or Mac
procedures to carry out this
operation.
17