Making Connections - Insignia NS-DSC7P-09 User Manual

4 Press or to select Single, then press
SET to confirm.
To set up the DPOF for all photos, select All
in this step.
To reset all DPOF settings to initial default,
select Reset in this step.
5 Press or to select the photo you want to
print.
6 Press or to set the number of copies you
want (0~30). To cancel DPOF for this photo,
select 0.
7 Press the SCN button to turn on the date
stamp for the current photo. Press it again to
turn off the date stamp.
8 Repeat Steps 5 to 7 for additional photos you
want to print.
9 Press SET or the MENU button to apply the
DPOF settings.
Choosing a startup image
To choose the startup image:
1 Press Power button to turn your camera on in
record mode.
2 Press the playback button to switch to
playback mode.
3 Press the MENU button, then press
or to select S.Image
4 Press or to select the photo you want to
use, then press SET to confirm. "Completed"
appears on the LCD.
5 Press the MENU button, then press
or . to select the Setup menu icon
6 Press or to select S.Image
press or SET.
7 Press or to select the option you want,
then press SET to confirm. Options include:
• Off—Disable startup image.
• System—Use the camera default image.
• My image—Use the image that you
specified in Step 5.
8 Press the MENU button to close the menu.
Note
The startup image is stored in internal memory, so
it is not deleted, even if the original image is
deleted or the memory formatted.
22
Insignia NS-DSC7B-09, NS-DSC7P-09, or NS-DSC7S-09 7 Megapixel Digital Camera
, , ,
and press SET.
, , ,
.
, then
www.insignia-products.com

Making connections

Connecting the camera to a TV
Use this connection to display recorded images
on a television with the supplied AV cable.
To connect the camera to a TV:
1 Set the TV Out setting to match the TV
system that you are using (See "Setup menu"
on page 11).
2 Turn off the camera and the TV.
3 Connect the camera to the TV set using the
supplied AV cable.
4 Set the TV input signal to Video In. Refer to
the documentation included with your TV for
more information.
Everything that would normally appear on the
camera's LCD, such as photo and video clip
playback, slide shows, and image or video
capture, appears on the TV.
Connecting the camera to a computer
To connect the camera to a computer:
1 Connect the camera to the computer using
the supplied USB cable. The LCD monitor
turns off when the connection is successful.
2 Click My Computer or Windows Explorer
on your computer. A new "Removable Disk"
appears in the drive list.