Installing The Wrist Strap; Understanding Camera Memory; Navigating The Menus - Insignia NS-DSC10B - Digital Camera - Compact User Manual

NS-DSC10A-10B_09-0323_MAN_V2.book Page 4 Monday, April 27, 2009 8:42 AM

Installing the wrist strap

To install the wrist strap:
1 Insert the short loop of the strap in the strap
eyelet.
2 Thread the larger loop of the strap though the
short loop and pull tight.

Understanding camera memory

Internal memory
This camera is equipped with 32 MB of internal
memory and approximately 20 MB of that memory
is available for photo/video storage. If no memory
card is inserted in the camera, all images and movie
clips recorded by the camera will be stored in the
internal memory.
External memory
Your camera supports SD cards up to 4GB and
SDHC cards up to 16GB. If there is a storage card
inserted in the memory slot, the camera
automatically saves all images and videos to the
storage card. The icon indicates that your
camera is using a memory card.
Installing the memory card
You can use an SD or SDHC memory card with this
camera. The memory card slot is inside the battery
cover, adjacent to the battery compartment.
Caution
• The memory card may be damaged if it is
removed while the camera is on.
• Do not touch the contacts on the back of the
memory card.
To install the memory card:
1 Turn off the camera.
2 Open the battery cover by sliding it in the
direction indicated in the illustration.
4
Insignia NS-DSC10A and NS-DSC10B 10 Megapixel Digital Cameras
3 Insert the memory card with the metallic part
facing the back of the camera until it clicks into
place.
Tip
To remove the memory card, push the card in slightly
to release it, then pull the card out of the card slot.
4 Close the battery cover.

Navigating the menus

The 4-way navigation control and the OK/DISP
button let you access the various menus available
from the On Screen Display (OSD). You can
configure a wide range of settings to ensure
optimal results from your photos and videos.
Face tracking/up
button
Macro/left
button
Further functions of these buttons are as follows:
Button Functions
• Press to confirm a selection when using the OSD menus.
• In Playback and Record mode, press to change the LCD
OK / DISP
Note: The OK/DISP button is disabled during video playback.
•
Note: Flash modes are only available for still images.
• In Playback mode, press to view the next image, video
Flash/right ( )
• In Playback Video mode, press to fast forward video
• In Menu mode, press to enter submenus or to navigate
www.insigniaproducts.com
OK/DISP button
Flash/right
button
Self-timer/down
button
screen display to show or hide OSD icons.
In Record mode, press to scroll through the flash mode
options. (Auto, Red-eye Reduction, Forced On, Slow Sync
and Off)
clip.
playback.
through menu selections.