Appendix; Understanding Folder And File Names; Legal Notices; Fcc Warning - Insignia NS-DSC10B - Digital Camera - Compact User Manual

10 megapixel digital camera
Hide thumbs Also See for NS-DSC10B - Digital Camera - Compact:
Table of Contents

Advertisement

NS-DSC10A-10B_09-0323_MAN_V2.book Page 18 Monday, April 27, 2009 8:42 AM
Specifications
Specifications are subject to change without notice.
Sensor
10 Megapixels
Type 1/2.3
LCD monitor
2.5-inch color LCD
Focus range
Normal: 15.75 in. (0.4 m) ~ infinity
Macro: (W) 5.9 in.~ 1.97 ft. (0.15 m ~0.6 m)
(T) 15.75 in.~ 1.97 ft. (0.4 m~0.6 m)
Aperture
f/2.8 (W) / f/5.2 (T)
Shutter
Mechanical and electronic shutter
8~1/2000 seconds
Lens
Focal length: f/6.2 (W)~18.6 mm (T), 3X optical zoom, 4X
digital zoom
File format
Still Image: EXIF 2.2-compatible JPEG
Video: AVI (MJPEG)
Resolution (still image)
10 Megapixels (3648 x 2736), 7 Megapixels (3072 × 2304),
3 Megapixels (2048 × 1536)
Sensitivity
Auto, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200
Low/Mid/High: 100 / 400 / 1600
Color balance
Auto, Sunny, Cloudy, Tungsten, Fluorescent
Exposure compensation
-2EV to +2EV in 1/3 steps, auto exposure
Exposure control
Metering: Multi-fixed
Face recognition AE and AF
Self-timer
10 seconds or Off
Flash
Auto, Red eye Reduction, Fill Flash, Forced On, Forced Off
Storage
Internal memory: 32 MB
Available capacity for photo/video storage: Approx. 20 MB
External memory: SD card (up to 4 GB), SDHC card (up to
16 GB)
OSD language
English, French, Spanish
Interface
USB cable
Power supply
2 AA batteries (Alkaline/NiMH/Lithium)
Level: Full/Half/Low
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating humidity
0% to 90%
Microphone
Built-in
Speaker
Built-in
Dimensions
1 × 2.44 × 3.66 inches
(2.55 × 6.2 × 9.3 cm)
Weight
Approx. .30 lb. (140 g) (without batteries)
Specifications subject to change without notice.
18
Insignia NS-DSC10A and NS-DSC10B 10 Megapixel Digital Cameras

Appendix

Understanding folder and file names

Your digital camera automatically creates a
directory of folders in the internal memory or
memory card. It uses these folders to organize still
images, movie clips, and other information.
Folder structure
All images and video can be found in the main
DCIM folder. Subfolder names begin with a
three-digit number, followed by "DICAM. " If new
files are created, a new folder named in sequence
will be made automatically.
File naming
File names begin with "DSCI, " and are followed by a
four-digit number that increases sequentially. File
numbering starts from 0001 when a new folder is
created.
If the highest folder number is 999 and the highest
file number exceeds 9999, the camera displays the
warning message "Folder cannot be created. " If this
occurs, delete unwanted photos and videos, or
replace the memory card.
Note
Do not change the folder and file names on the
memory card using your computer. If you do, you
may be unable to play back your files using the
digital camera.

Legal notices

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of
this product is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply within the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced technician for help.

FCC warning

Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the
user's authority to operate this equipment.

Canada ICES-003 statement

This Class B digital apparatus complies with Canadian ICES-003.
www.insigniaproducts.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ns-dsc10a

Table of Contents