18
VAIO Computer Reference Manual
To change the VGA enable jumper, perform the following steps:
1
Remove the system cover (see
page 20).
2
Set the jumper to enable or disable (see
page 60).
3
Reinstall the system cover (see
page 21).
INTEN Jumper
You can enable or disable the onboard VGA interrupt if you install a VGA
PCI add-in card.
To change the INTEN jumper, perform the following steps:
1
Remove the system cover (see
page 20).
2
Set the jumper to enable or disable (see
3
Reinstall the system cover (see
page 21).
"Removing the System Cover"
"VGA Enable (VGAEN)"
"Replacing the System Cover"
"Removing the System Cover"
"INTEN"
"Replacing the System Cover"
on
on
on
on
on page 61).
on