Dimm Configurations; L2 Cache; Graphics - Sony PCV-L400 - Vaio Slimtop Computer Reference Manual

92
VAIO Computer Reference Manual

DIMM Configurations

*
DIMM1
0, 16, 32, 64, 128
* The PCV-L400 is shipped with 64 MB. The PCV-L600 and PCV-L600S are shipped with 128 MB. SDRAM is
expandable to 256 MB. Computer SDRAM is unbuffered DIMM, specification Rev. 1.0 or later. Supports
SDRAM memory. Does not support EDO memory or buffered DIMM memory. Memory can be installed in
either socket. Memory size can vary between sockets. DIMMs can be single- or double-sided. DIMMs must
be 3.3V unbuffered 4-clock, 64-bit or 72-bit, 66 MHz or 100 MHz SDRAM module. Use only 100 MHz FSB-
supported memory. Do not mix 66 MHz memory with 100 MHz memory.

L2 Cache

Installed
Controller

Graphics

*
Controller
Video memory
Resolution (displayed resolution depends on the graphics display you use)
True color (32 bits) Up to 1920 x 1080 at 70 Hz non-interlaced
True color (24 bits) Up to 1920 x 1080 at 70 Hz non-interlaced
High color (16 bits) Up to 1920 x 1200 at 70 Hz non-interlaced
256 colors (8 bits)
* Supports DDC-1 and DDC-2b standards for Plug and Play displays.
*
DIMM2
0, 16, 32, 64, 128
512 kbytes secondary write-back cache (in processor),
direct-mapped organization, BSB cache
Intel 440BX Host Bridge/Controller
ATI Rage LT Pro AGP 64-bit PCI graphics accelerator
including 1X and 2X modes with sidebands
4 Mbytes
Up to 1920 x 1200 at 70 Hz non-interlaced