To Unlock The Doors - Dodge 2010 Viper Owner's Manual

Dodge 2010 viper owner's manual
Hide thumbs Also See for 2010 Viper:
Table of Contents

Advertisement

RKE Transmitter

To Unlock the Doors

Press and release the UNLOCK button on the RKE
transmitter once to unlock the driver's door or twice to
unlock both doors. The park lights and turn signal lights
will flash to acknowledge the signal and the illuminated
entry system will turn on. In addition, the words DOOR
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19
UNLOCKED will flash in the odometer if one door is
unlocked or will remain on steadily if both doors are
unlocked.
NOTE: On Coupe models, pressing either the UNLOCK
button or the LIFTGATE button will allow liftgate access.
Remote Key Unlock, Driver Door/Both Doors First
This feature lets you program the system to unlock either
the driver's door or both doors on the first press of the
UNLOCK button on the RKE transmitter. To change the
current setting, proceed as follows:
1. Press the UNLOCK button on a programmed RKE
transmitter for at least four seconds, but not longer than
10 seconds. Then, press the LOCK button.
2. Release both buttons at the same time.
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 viper srt10

Table of Contents