Service Processor Error Codes; Serveraid Error Codes - IBM 8835 - Eserver 325 - 1 GB RAM Maintenance And Troubleshooting Manual

Note: See "System" on page 94 to determine which components should be replaced by a field service technician.
Error code/symptom
1762
(Hard disk configuration error)
1962
(Drive does not contain a valid boot
sector)
2462
(Video memory configuration error)
5962
(IDE CD-ROM drive configuration error)
8603
(Pointing-device error)
0001200
(Machine check architecture error)
00012000
(Microprocessor machine check)
I9990650
(AC power has been restored)

Service processor error codes

When viewed from POST, service processor (baseboard management controller)
error codes will appear in hexadecimal form (generally beginning with A2, A3, A4,
A5, A6, A7, AD, AE, or E1), unless a Remote Supervisor Adapter is installed.
However, when viewed from the System Error Log, the messages will appear as
text. To determine a possible error condition for the service processor, see the
System Error log (see "Starting the diagnostic programs and viewing the test log"
on page 18).

ServeRAID error codes

In the following error codes, x can be any number or letter.
86 Eserver 325 Type 8835: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
1. Hard disk drive.
2. Hard disk drive cables.
3. Run the Configuration/Setup Utility program.
4. SCSI backplane.
5. System board.
1. Verify that a startable operating system is installed.
2. Run diagnostics.
3. Hard disk drive.
4. SCSI backplane.
5. Cable.
6. System board.
1. Video adapter (if installed)
2. System board
1. Run the Configuration/Setup Utility program.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
1. Pointing device
2. System board
1. Microprocessor 1
2. Optional microprocessor 2
3. System board
1. Microprocessor
2. System board
1. Check cable.
2. Check for interruption of power.
3. Power cable.