Dodge 2010 Avenger Owner's Manual page 78

Installing Child Restraint Tether Strap
1. Rotate the cover over the anchor directly behind the
seat where you are placing the child restraint.
1— Cover
3— Attaching Strap
2. Route the tether strap to provide the most direct path
for the strap between the anchor and the child seat. If
A— Tether Strap Hook
B— Tether Anchor
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77
your vehicle is equipped with adjustable rear head
restraints, raise the head restraint, and where possible,
route the tether strap under the head restraint and
between the two posts. If not possible, lower the head
restraint and pass the tether strap around the outboard
side of the head restraint.
3. Attach the tether strap hook (A) of the child restraint
to the anchor (B) and remove slack in the tether strap
according to the child
instructions.
WARNING!
An incorrectly anchored tether strap could lead to
increased head motion and possible injury to the
child. Use only the anchor positions directly behind
the child seat to secure a child restraint top tether
strap.
restraint manufacturer's
2