Running Berenstain Bears From Dos - Epson ActionPC 2000 Read This First Manual

Running Berenstain Rears from DOS
The program Compton's Berenstain Bears Learning at Home,
Volume 1 is an MS-DOS-based program that cannot be run
from a Windows icon like your other multimedia programs. To
run Berenstain Bears, you must exit Windows (if you are
currently using it) and enter a command at the MS-DOS
prompt.
Note
If you purchased any additional MS-DOS-based game
programs, you must also run them from the MS-DOS
prompt as described here. See the program documentation
for information about the directory in which the program is
stored and the command you should use to start it.
First insert the Berenstain Bears CD in your CD-ROM drive.
Then follow these steps to start the program from the MS-DOS
prompt:
1. If you are in Windows, you can access the MS-DOS prompt
by selecting Exit from the Windows File menu and exiting
Windows. If you are in FocalPoint, first select the Exit
button (a door icon) to exit to Windows Program Manager.
2. When you see the C: \ prompt, type the following and press
Enter
CD \ATHOME
3. Now type the following and press
START
4. After a few moments, you see the program's title screen.
16 Read This First
to log onto the Berenstain Bears program directory:
Enter
to start the program