Marvell - Asus A500 User Manual

2.9.4

Marvell

The Marvell
®
on the SAS hard disk drives.
Setting the RAID item in BIOS
You must set the RAID item in the BIOS Setup before you can create a RAID set.
To do this:
1. Install two internal SAS hard disk drives to the SAS connectors labeled
SAS1/2.
2. Boot up your computer, and press <Del> during POST to enter the BIOS
setup.
In the Advanced menu, go to Onboard Devices Configuration, and enable
3.
both Marvell SAS and SAS Boot ROM.
4. Press <F10> to save the changes and exit.
Onboard Devices Configuration
High Definition Audio
Front Panel Type
Marvell Storage Controller
Marvell Storage Boot Rom
Marvell SAS
SAS Boot ROM
Marvell LAN1
Marvell LAN2
LAN Boot ROM
Onboard 1394 Controller
The RAID BIOS setup screens shown in this section are for reference only, and
may not exactly match the items on your screen.
ASUS A500/AS-D920, BA5190
A500 AS-D920.indb 43
SAS RAID configurations
®
88SE6320 SAS controller allows you to configure RAID 0 and 1 set
BIOS SETUP UTILITY
Advanced
[Enabled]
[HD Audio]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Enable or Disable
High Definition Audio
Controller
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
4/12/10 5:53:52 PM
2-43