Table of Contents
Advertisement
2.8
Realtek Teaming Utility
This motherboard features two Realtek
supports Teaming function, which allows two single connections to be grouped
as one single connection, providing benefits such as bandwidth increase, load
balancing, and fault tolerance.
The speed of transmission is subject to the actual network environment or
status even with Teaming enabled.
To install Realtek Teaming Utility:
Place the support DVD into the optical drive. Click Realtek Teaming Utility
1.
from the Utilities tab.
2.
Follow the onscreen instructions to complete the installation.
Configuring Realtek Teaming Utility in Windows
To create a teaming set in Windows
Launch the Realtek Teaming Utility by clicking Start > All Programs >
1.
Realtek > Teaming Utility > Teaming Utility.
2.
Select a LAN adapter from the
left column, select Teaming in
the middle column, and then click
Create Team.
3.
Enter a name for the teaming in
the Team Name box. Select a
teaming mode that best suits your
network environment, and then
choose the adapters to join the
teaming set. Click OK to finish the
teaming setting.
2-30
A500 AS-D920.indb 30
8111C PCIe Gigabit LAN controllers and
®
XP
®
XP:
®
Chapter 2: Getting started
4/12/10 5:53:40 PM
Advertisement
Table of Contents
