Table of Contents
Advertisement
Creating a RAID 0 set (striped)
To create a RAID 0 set:
From the utility main menu, select 1. Create RAID Volume and press
1.
<Enter>. The following screen appears.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1027 ICH10R wRAID5
[↑↓]-Change
2.
Enter a name for the RAID 0 set and press <Enter>.
3.
When the RAID Level item is highlighted, press the up/down arrow key to
select RAID 0(Stripe), and then press <Enter>.
4.
When the Disks item is highlighted, press <Enter> to select the hard disk
drives to configure as RAID. The following screen appears.
5.
Use the up/down arrow key to highlight a drive, and then press <Space>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
ASUS A500/AS-D920, BA5190
A500 AS-D920.indb 37
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
[
CREATE VOLUME MENU
Name:
Volume0
RAID Level:
RAID0(Stripe)
Disks:
Select Disks
Strip Size:
128KB
Capacity:
XXX
Create Volume
Enter a unique volume name that has no special characters and is
16 characters or less.
[TAB]-Next
[ESC]-Previous Menu
[
SELECT DISKS
Port Drive Model
Serial #
0
XXXXXXXXXXXX
XXXXXXXX
1
XXXXXXXXXXXX
XXXXXXXX
2
XXXXXXXXXXXX
XXXXXXXX
3
XXXXXXXXXXXX
XXXXXXXX
Select 2 to 6 disks to use in creating the volume.
[↑↓]-Previous/Next
[SPACE]-SelectsDisk
]
GB
[
HELP
]
[Enter]-Select
]
Size
Status
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
[ENTER]-Done
2-37
4/12/10 5:53:46 PM
Advertisement
Table of Contents
