Soft Keys - NEC DTL-6DE-1 - DT310 - 6 Button Display Digital Phone User Manual

1.

SOFT KEYS

The Soft Keys on the DT Series provide a set of
functions on the LCD that adapt to the changing state
of the telephone. While default Soft Key settings are
provided, desired functions can be assigned to
individual stations as required. The Soft Keys, at the
bottom of the LCD, can display the names of available
functions, names of user-assigned functions and
names of functions assigned by a specific Soft Key
pattern. Displayed Soft Keys can vary, depending on
the state of the phone and/or when the Next/Previous
key is pressed.
7:35 AM MON 12 JUL 2010
MIC DND
Exit
Note: Soft Key function is available for the terminals
with LCD.
Exit Key
Press to exit Menu or Help mode and go back to the
time display.
Help Key
Press the Help Key, then desired Soft Key for helpful
information about that key.
MIC (Microphone)
Press the Soft Key below "MIC" to activate or
deactivate the Microphone. LED on MIC key will
illuminate when MIC is on.
DND (Do Not Disturb)
Press the Soft Key to reject call termination to the
preassigned station.
Default Displays for Each Status
Default Soft Key settings are provided corresponding to
particular functions. Different Soft Key settings are
displayed at the bottom of the LCD depending on the
status, as shown below.
Different patterns of Soft Key settings can be registered
for individual call status and assigned to individual
terminals as required.
4051
>>>
Help
21
IDLE
4:26 PM MON 12 JUL 2010
MIC DND
DIAL TONE/DIALING
4:26 PM MON 12 JUL 2010
(1)
MIC PICK
Push >>>
(2)
4:26 PM MON 12 JUL 2010
FDN FDB
RINGING
4:26 PM MON 12 JUL 2010
MIC VOICE
>>>
FDA >>>
>>>
>>>