Adjusting Background Transparency Settings From The Menu Transparency Menu; Editing The 4-Digit Pin From The Safety Lock Pin Menu - Cisco LCD-110-PRO-52S User Manual

Using the Setup Menu
Adjusting Background Transparency Settings from the Menu Transparency
Menu
You can change the background transparency for the OSD calibration menu.
Before You Begin
This procedure assumes that your remote control and the front panel controls on your LCD display are
not locked.
Procedure
From the main menu, choose Setup > Menu Transparency.
Step 1
To highlight the name of a predefined transparency setting, use the Up and Down buttons.
Step 2
Available options are:
•
•
•
•
Step 3 To save your selections and implement them, push Enter.
Related Topics
•

Editing the 4-digit PIN from the Safety Lock PIN Menu

A 4-digit PIN unlocks features on the front panel of your LCD display and unlocks the remote control,
after anyone has locked them. You can change the PIN.
Our factory default values are well known for the PIN, which is not secret until after you change it from
the factory default. The default is 0000 for 40" LCD displays and 1234 for 52" LCD displays.
We recommend that you use a secret PIN.
Before You Begin
This procedure assumes that your remote control and the front panel controls on your LCD display are
not locked.
Procedure
Step 1 From the main menu, choose Setup > Safety Lock PIN.
Enter the new 4-digit PIN that you will use to lock and unlock your remote control.
Step 2
To save your selections and implement them, push Enter.
Step 3
User Guide for Cisco LCD Professional Series Displays
4-14
High
Medium
Low
Opaque
Locking Front Panel Controls and the Remote Control, page 2-7
Chapter 4 Adjusting Display Settings
OL-17986-01