Using The Input Menu; Choosing A Video Input Source From The Source List Menu - Cisco LCD-110-PRO-52S User Manual

Using the Input Menu

Using the Input Menu

•
•

Choosing a Video Input Source from the Source List Menu

When multiple devices are attached to your display by a variety of means, you can choose which of them
is the one video input source to use.
If your remote control is not locked, you can press its Source button to open the Source List menu.
Tip
Before You Begin
•
•
•
Procedure
Step 1 From the main menu, choose Input > Source List.
Step 2 To highlight the name of the input source, use the Up and Down buttons.
Listed input source types are:
•
•
•
•
•
•
•
To save your selection and implement it, push Enter.
Step 3
User Guide for Cisco LCD Professional Series Displays
4-2
Choosing a Video Input Source from the Source List Menu, page 4-2
Working in the Edit Name Menu, page 4-3
BNC is available as an input source on a 52" display only when both of the following statements
are true:
– The display is connected to a BNC cable.
– The display is not attached to a component cable.
Component is available as an input source on a 52" display only when both of the following
statements are true:
– The display is attached to a component cable.
– The display is not connected to a BNC cable.
This procedure assumes that your remote control and the front panel controls on your LCD display
are not locked.
PC
DVI
AV
HDMI
TV
BNC (available only on 52" LCD displays)
Component (available only on 52" LCD displays)
Chapter 4 Adjusting Display Settings
OL-17986-01