Turning Digital Noise Reduction On Or Off From The Digital Nr Menu; Turning Film Mode On Or Off From The Film Mode Menu - Cisco LCD-110-PRO-52S User Manual

Using the Picture Menu

Turning Digital Noise Reduction On or Off from the Digital NR Menu

Turns the digital noise reduction feature on or off.
Before You Begin
This procedure assumes that your remote control and the front panel controls on your LCD display are
not locked.
Procedure
Step 1 From the main menu, select Picture > Digital NR.
Push the Up or Down button to choose On or Off.
Step 2
To save your selection and implement it, push Enter.
Step 3
Related Topics
•

Turning Film Mode On or Off from the Film Mode Menu

Turns film mode on or off.
Before You Begin
•
•
Procedure
From the main menu, select Picture > Film Mode.
Step 1
Push the Up or Down button to choose On or Off.
Step 2
To save your selection and implement it, push Enter.
Step 3
Related Topics
•
User Guide for Cisco LCD Professional Series Displays
4-8
Locking Front Panel Controls and the Remote Control, page 2-7
This procedure assumes that your remote control and the front panel controls on your LCD display
are not locked.
When you use an HDMI signal cable and choose HDMI from the Source List menu, this feature
requires that the HDMI signal use interlaced scan, not progressive scan.
Locking Front Panel Controls and the Remote Control, page 2-7
Chapter 4 Adjusting Display Settings
OL-17986-01