European Notice; European Class A Warning; Uk-Wiring The Mains: Power Supply Plug - Cisco LCD-110-PRO-52S User Manual

Regulatory Compliance Notes and Notices

European Notice

Products with the CE marking comply with the EMC Directive (89/336/EEC), (92/31/EEC),
(93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European
Community. Compliance with these directives implies conformity to the following European norms:
•
•
•
•
•
•

European Class A Warning

This is a Class A product. In a domestic environment this product may cause radio interference in which
case you may be required to take adequate measures.
UK—Wiring the Mains: Power Supply Plug
Before disconnecting the power supply plug from the mains, contact Cisco or a Cisco-authorized Digital
Media Systems partner.
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the
fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of
the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable.
If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.
Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points
in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety
approved extension lead or consult your dealer for assistance. However, if there is no alternative but to
cut off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains
socket as there is a risk of shock hazard from the bared flexible cord.
The wires in the mains lead are coloured in accordance with the following code:
•
•
As these colours may not correspond to the coloured markings identifying the terminals in your plug,
proceed as follows:
•
•
Warning Do not connect either wire to the earth terminal, which is marked with the letter E, or by the Earth
symbol, or is coloured green, or is coloured green and yellow.
User Guide for Cisco LCD Professional Series Displays
1-10
EN55022: Radio Frequency Interference
EN55024: Electromagnetic Immunity of Information Technology Equipment
EN61000-3-2: Power Line Harmonics
EN61000-3-3: Voltage Fluctuations
EN55013: Radio disturbance characteristics of broadcast receivers and associated equipment
EN55020: Electromagnetic immunity of broadcast receivers and associated equipment
Blue is neutral.
Brown is live.
The wire coloured blue must be connected to the terminal marked with the letter N or coloured blue
or black.
The wire coloured brown must be connected to the terminal marked with the letter L or coloured
brown or red.
Chapter 1 Important Safety and Compliance Information
OL-17986-01