Introduction; Important; Precaution - Sharp UP-3301 Instruction Manual

INTRODUCTION

Thank you very much for your purchase of the SHARP POS Terminal Model UP-3301. Please read this
Manual carefully before operating your machine in order to gain full understanding of functions and features.
Please keep this manual for future reference. It will help you if you encounter any operational problems.

IMPORTANT

• Install your POS terminal in a location that is not subject to direct radiation, unusual temperature
changes, high humidity or exposure to water sources. Please keep the POS terminal away from
heat and magnetic sources.
Installation in such locations could cause damage to the cabinet and the electrical components.
• The POS terminal should not be operated by an individual with wet hands.
The water could seep into the interior of the POS terminal and cause component failure.
• Do not apply excessive pressure to the display.
Do not use a sharp-pointed object on the display, or the touch panel and/or LCD may become damaged.
• When cleaning your POS terminal, use a dry, soft cloth. Never use solvents, such as benzine and/
or thinner.
The use of such chemicals will lead to discoloration or deterioration of the cabinet.
• The POS terminal plugs into any standard wall outlet (120V ±10% AC) with a dedicated earth-guard.
Other electrical devices on the same electrical circuit could cause the POS terminal to malfunction.
• If the POS terminal malfunctions, call your authorized SHARP dealer for service - do not try to
repair the POS termimal yourself.
• For a complete electrical disconnection, remove the AC power cord from the wall outlet.

PRECAUTION

This POS terminal has a built-in memory protection circuit which is operated by a rechargeable battery pack.
Please note that all batteries will, in time, dissipate their charge even if not used. Therefore to insure an
adequate initial charge in the protection circuit and to prevent any possible loss of memory upon installation,
it is recommended that each unit be allowed to be recharged for a period of 24 to 48 hours prior to use by
the customer.
After installation, the battery pack is charged when the machine is plugged in and its power switch is set to
the "ON" position. This recharging precaution can prevent unnecessary initial service calls.
Contains Nickel Metal Hydride Battery. Must be Disposed of Properly.
Contact Local Environmental Officials for Disposal Instructions.
This product utilizes tin-lead solder, and fluorescent lamp containing a
small amount of mercury.
Disposal of these materials may be regulated due to environmental
considerations.
For disposal or recycling information, please contact your local
authorities or the Electronics Industries Alliance: www.eiae.org
BATTERY DISPOSAL
1
www.cashregisters.net