Machine Number; Consecutive Number; Interval Timer - Sharp UP-3301 Instruction Manual

■ Machine number

When your store has two or more POS terminals, it is practical to assign a unique machine number for their
identification.
Procedure

■ Consecutive number

The consecutive number increases by one each time a receipt is issued.
Procedure

■ Interval timer

You can program the timer for THE TILL TIMER
Procedure
Program the item as follows:
• MACHINE# (Use the numeric entry)
Machine number (max. 6 digits: 0 to 999999)
Program the item as follows:
• CONSECUTIVE# (Use the numeric entry)
Enter a number (max. 4 digits: 0 to 9999) that is one less
than a desired starting number.
TM
and the screen save mode timer.
Program each item as follows:
• TILL TIMER (Use the numeric entry)
The POS terminal counts the number of times the drawer is
left open for longer than a programmed time limit. The
counter will be incremented by one each time a programmed
time limit is reached. The time limit for THE TILL TIMER
can be preset for 0 to 255 seconds. The count is printed on
the transaction report and server report. If the number "0" is
entered, this function is unavailable.
• SCREEN SAVE (Use the numeric entry)
Screen save mode timer (max. 2 digits: 0 to 99 minutes)
If the number "0" is entered, the POS terminal will turn the
display off after 100 min., if it remains idle.
TM
159
www.cashregisters.net