Network Settings - Cisco SLM224G4S Administration Manual

Getting Started
Setup
Cisco Small Business SLM Series Smart Switches Administration Guide
•
Jumbo Frame — Enables Jumbo Frames on the device (packet size of up to
9k is supported)
frames. This ensures less overhead, lower processing time, and fewer
interruptions.
The Jumbo Frame Setting applies only to SLM2024 and SLM2048 Smart
NOTE
Switches. Other Smart Switches do not support this feature.
The possible field values are:
-
Enable
— Switch will recognize and forward Jumbo Frames.
-
Disable
— Switch will not recognize or forward Jumbo Frames.
•
Model Name — Displays the device model name.
•
Hardware Version — Displays the hardware version number.
•
Boot Version — Indicates the system boot version currently running on the
device.
•
Firmware Version — Displays the firmware / software version.
•
System Location — Displays the location where the system is currently
running.
•
System Contact — Displays the name of the contact person.
•
System Up Time — Displays the amount of time that has elapsed since the
last device reset. The system time is displayed in the following format:
Days, Hours, Minutes and Seconds. For example: 41 days, 2 hours, 22
minutes and 15 seconds.
•
Current Time — Displays the current time and date.

Network Settings

Network Settings
The
Summary
window where they cannot be edited.
Network Settings
To open the
Jumbo Frames enable the transportation of data in fewer
.
window allows you to edit many of the fields on the
window:
1
5