Poe Power Settings - Cisco SLM224G4S Administration Manual

Port Management

PoE Power Settings

STEP 2
STEP 3
PoE Power Settings
NOTE
Cisco Small Business SLM Series Smart Switches Administration Guide
Global Parameter
Global Parameter
The
•
LACP System Priority (1-65535) — Indicates the global LACP priority value.
The possible range is 1- 65535. The default value is 1.
Port Priority
Port Priority
The area contains the following fields:
•
Port — Defines the port number to which timeout and priority values are
assigned.
•
Port-Priority — Defines the LACP priority value for the port. The field range
is 1-65535.
•
LACP Timeout — Administrative LACP timeout. The possible field values
are:
-
Short
— Defines a short timeout value.
-
Long
— Defines a long timeout value. This is the default value.
•
Admin Key — A value assigned to an LACP port that enables the port to join
a LAG. Only ports with the same Admin Key can join the same LACP LAG.
This value is assigned automatically by the system based on port to LAG ID
membership.
Define the relevant fields.
Click Save Settings. The settings are modified, and the device is updated.
PoE Power Settings
The
(PoE) ports on the Switch.
This option is available for SLM224P and SLM248P only.
To open the PoE Power Settings
area contains the following field:
window allows you to configure the Power over Ethernet
window:
2
23