HAMPTON BAY HB1200H Owner's Manual page 11

3. Loosely assemble the sill support using the
parts in Fig. 3.
4, Select the position that will place the sill
support near the outer most point on sill
(See Fig. 4)
NOTE: Be, careful when you install the cabinet
(frame guides @ are broken so easily).
5. Attach the sill support to the cabinet track hole
in relation to the selected position using
2 Type A screws in each support(See Fig. 4).
6. The cabinet should be installed with a very
slight tilt(about 1/£) downward toward the
outside (See Fig. 5).
Adjust the bolt and the nut of sift support for
balancing the, cabinet.
7. Attach the cabinet to the window stool by
driving the screws ®(Type B: Length sixteen
millimeters and below.) through the front angle
into window stool,
8. Pull each Frame curtain fullly to each window
sash track, and repeat step 2.
9. Attach each Frame curtain the window sash
using screws Q(Type C).
(See Fig, 6)
NutQ
F_me Guide @
INDOOR
_rew(Type A) @
11,
i,
Cabinet
OUTDOOR
brew(Type B) Q
Sill suppod(_)
Front Angle
Screw(Type B)
Fig, 3
Fig. 4
Sill supp,ortQ
Fig. 5
c©
-11 o