DAELIM NS125III Service Manual page 139

Front Wheel/Front Fork/Steering
Remove the fork tube from the bottom case.
Remove the piston and rebound spring from the
fork tube.
Inspection
Place the fork spring on a level place, and
measure the free length.
If the free length deviates from the service limit,
replace the spring with a new one.
Check components for damage or abnormal
wear. Replace defective parts with new ones.
Service limit: 230.8mm (9.087in)
Place the fork tube on a V-block, and measure
deflection with a dial gauge.
Service limit: Replace if the deflection is greater
than 0.2mm (0.008in)
Check the slider bush contact face.
If the slider bush is extensively damaged, replace
the bottom case.
Assembly
Wash parts with clean oil prior to assembling.
Assemble the rebound spring and the fork piston
to the fork tube.
Assemble the fork tube to the bottom case.
12-12
Set
Top
Fork tube
Bottom case
Bottom
Bottom case