Headlight; Winker Switch - DAELIM CORDI Owner's Manual

HEADLIGHT

<TURNING ON HEADLIGHT>
Put main switch key in "ON" position and
turn on headlight switch.
HEADLIGHT SWITCH
SWITCH POSITION
Headlight, taillight,
(H) position lamp and
meter lights on.
Position lamp, taillight,
(P)
and meter lights on.
(OFF) Light turned off.
12
<HEADLIGHT HIGH BEAM SWITCH>
High beam or low beam can be operated
by the use of high/low beam switch.
HEADLIGHT HIGH BEAM SWITCH
HIGH BEAM
(HI)
D
LOW BEAM
FUNCTION
(LO)
D
●Use the high beam only in the
suburban road or when the usage of
the high beam not hinder the safe
driving of the car ahead.
...... used when needing extra
light.
...... used when other vehicles
are present, in the city, etc.
CAUTION

WINKER SWITCH

WINKER SWITCH
If this switch is turned on when the main
switch is in an ON position, the winker will
operate.
⇨ (R)....used when making a right turn.
⇦ (L)....used when making a left turn.
CAUTION
●The winker switch does not auto-
matically turn back to its original
position after completing the turn.
Please set the switch back to its
center position after turning.