Usb Settings; Storage Sharing - TP-Link TL-WR842ND User Manual

10.0.0.10 and 10.0.0.1 respectively. Security protocol and other parameters for IPsec tunnel and
the remote router should be configured the same.
As Security Association is unidirectional, an ingoing SA and an outgoing SA are created to protect
data flows for each tunnel after IPsec tunnel is successfully established. The ingoing SPI value
and outgoing SPI value are different. However, the Incoming SPI value must match the Outgoing
SPI value at the other end of the tunnel, and vice versa.
4.9

USB Settings

Figure 4-37 The USB Settings menu
There are four submenus under the USB Settings menu (shown in Figure 4-37), Storage Sharing,
FTP Server, Media Server, Print Server and User Accounts. Click any of them, and you will be
able to configure the corresponding function.
4.9.1

Storage Sharing

Choose menu "USB Settings→Storage Sharing", you can configure a USB disk drive attached
to the Router and view volume and share properties such as share name, capacity, used space,
and free space, etc on this page as shown below.
Service Status - Indicates the Network Sharing service's current status. You can click
the Start button to start the Storage Sharing service and click the Stop button to stop it.
Volume - The volume name of the USB drive the users have access to.
Capacity - The storage capacity of the USB driver.
TL-WR842ND 300Mbps Multi-Function Wireless N Router
Figure 4-38 Storage Sharing
- 54 -