TP-Link TL-WR842ND User Manual page 30

You can also keep the default WPS Status as Enabled and click the Add device button
in Figure 4-2, then Choose "Press the button of the new device in two minutes" and
click Connect. (Shown in the following figure)
Step 2: Press and hold the WPS button of the client device directly.
Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup
process.
Step 4: When the WPS LED is on, the client device has successfully connected to the Router.
Step 5: Refer back to your client device or its documentation for further instructions.
II. Enter the client device's PIN on the Router
Use this method if your client device has a Wi-Fi Protected Setup PIN number.
Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-2,
then the following screen will appear.
Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then
click Connect button.
Step 3: "Connect successfully" will appear on the screen of Figure 4-4, which means the client
device has successfully connected to the Router.
TL-WR842ND 300Mbps Multi-Function Wireless N Router
Figure 4-3 Add A New Device
Figure 4-4 Add A New Device
- 22 -